MB16XLC1_Test1.AVI

YouTube Uploaded by pieruixmaster on Sep 21, 2011
You might recognize the top circular sequencer from this auction post.
"This is the 1st test of the MB16XLC1, it has so many options I had to remember the settings. lol, but I will post another re-fined one, this was just a quick sound check and setup for this.

There is a timing output on both of the clocks, that can be feed into either channel via A or B Input. I am only running one oscillator in channel B and then out of B into A/In, then A/Out to the VCO.

This has 1 master clock, 2 sub dividers that splits the clocks by 1X, 2X, 4X, 8X and 10X. Either of the banks A or B and run in snyc with one another or individualy.

Each bank of 16 has it's own scan and return control switch, "right side" and there is a divider control that counts 1 thur 10 (Control switch Selected) and that is feed into either of the Timing Switch Selector switches.

On the Input select switches you can take the output of either of the A or B timing output and send it back into the control. This will allow for a ratcheting effect.

All of the 32 channels can be turned on or off, or used as a jump off point for the other."