MATRIXSYNTH: MFB Dominion-X Audio Demos & Video


Tuesday, November 29, 2011

MFB Dominion-X Audio Demos & Video



Note the first demo went up back in April, but has since been pulled. See this post for the original control panel graphic.







Video from the last Musikmesse (note the video mentions "with Schippmann Filter" Musikmesse 2011: MFB Dominion X


YouTube Uploaded by nerk on Apr 9, 2011

"MFB Dominion Analogsynthesizer mit Schippmann Filter"

Current SoundCloud demo description translated to Googlish (original German further below): "MFB-DOMINION X * Analog synth with presets * 3 VCOs with ring modulation and waveshaping * Dual Dual-Sync and FM * 6-way multi-mode filter with 12/18/24 dB lowpass * Patch panel for external CV / gate control * Velocity routing matrix with 11 goals * 3 LFOs, 2 with one-shot function and reset * Suggested retail price: XXX, - € DOMINION X is the new synth from MFB. It combines the advantages of analog sound production, storability and modular patch options. With improved circuitry, advanced features and a new design DOMINION X is the first among a new class MFB.
DOMINION three oscillators offer maximum functionality. Each waveform can be modulated in the symmetry. That is, it can not only the pulse width of the rectangle, but also to triangle sawtooth and triangle can be continuously changed to sinus. All three oscillators have downstream ring modulators and VCO 2 & 3 can be synced to VCO 1. In addition, VCO can be frequency modulated 1 & 2 of VCO3. A processor-controlled temperature regulation guarantees a high degree of tuning stability of the analog VCO circuit.
VCO allows the mixer to the white noise or an external sound source to mix.

The filter has six different modes. There are three low passes with 12, 18 and 24 dB, and a high-pass filter, a bandpass and a bandstop filter with 12 dB or 6 dB slope. The filter means may invertible envelope keytracking, LFO, VCO, various MIDI controllers, and can be modulated via the CV input with an external control voltage.

The two ADSR envelopes are assigned to the VCF and the VCA. Envelope 1 may also modulate the VCO. The LFOs 1 & 2 have six waveforms, including Sample & Hold, and let in the one-shot mode enable, so they become simple envelopes. A third LFO, which has the form of sine wave can, in combination with the modulation of a keyboard for the dynamic control of VCO, VCF and VCA are used.

The assignment of the modulators via selectors, which are found next to the respective destinations. Thus, let the internal modulation connections change extremely quickly - ideal for live use.
For the integration of external modulation, control and audio sources, there are nine inputs, what are oscillators, filters, VCA, CV / Gate mixer and the X DOMINION other analog synthesizers such as MEGA DWARF, Analogsequenzern e.g. URZWERG the PRO or modular systems can be connected.
An extra selector allows the assignment of velocities up to 11 different modulation targets.

DOMINION X has 128 memory slots for your own sound creations. To help you sound programming without an attached keyboard, there are several demo sequences. To use the filter box DOMINION X as the audio input of the VCA can be opened permanently. Insert jack on the rear, an effects pedal or distortion pedal to be looped into the signal path."

Original German:

"MFB-DOMINION X

* Analogsynthesizer mit Speicherplätzen
* 3 VCOs mit Waveshaping und Ringmodulation
* Dual-Sync und Dual-FM
* 6-fach Multimodefilter mit 12/18/24 dB Lowpass
* Steckfeld für externe CV/Gate-Steuerung
* Velocity-Routingmatrix mit 11 Zielen
* 3 LFOs, 2 mit One-Shot-Funktion und Reset
* unverbindlicher Verkaufspreis: XXX,- Euro

DOMINION X ist der neue Synthesizer von MFB. Er verbindet die Vorteile von analoger Klangerzeugung, Speicherbarkeit und modularen Patchmöglichkeiten. Mit verbesserten Schaltungen, erweiterten Funktionen und im neuen Design ist DOMINION X das erste Gerät einer neuen MFB-Klasse.

DOMINIONs drei Oszillatoren bieten maximale Funktionalität. Jede Wellenform kann in der Symmetrie moduliert werden. Das heißt, es kann nicht nur die Pulsweite des Rechtecks, sondern auch Sägezahn zu Dreieck und Dreieck zu Sinus kontinuierlich verändert werden. Alle drei Oszillatoren verfügen über nachgeschaltete Ringmodulatoren und VCO 2 & 3 können zu VCO1 synchronisiert werden. Darüber hinaus können VCO 1 & 2 von VCO3 frequenzmoduliert werden. Eine prozessorgesteuerte Temperaturregelung garantiert eine hohe Stimmstabilität der analogen VCO-Schaltung.
Zu den VCOs lässt im Mixer weißes Rauschen oder eine externe Klangquelle hinzumischen.

Das Filter verfügt über sechs verschiedene Modi. Es gibt drei Tiefpässe mit 12, 18 und 24 dB, sowie einen Hochpass, einen Bandpass und eine Bandsperre mit jeweils 12 dB bzw. 6 dB Flankensteilheit. Das Filter kann mittels invertierbarer Hüllkurve, Keytracking, LFO, VCO, verschiedener MIDI-Controller und über den CV-Eingang mit externer Steuerspannung moduliert werden.

Die beiden ADSR-Hüllkurven sind dem VCF und dem VCA zugewiesen. Hüllkurve 1 kann jedoch auch die VCOs modulieren. Die LFOs 1 & 2 verfügen über sechs Wellenformen, inklusive Sample&Hold, und lassen sich in den One-Shot-Modus versetzen, womit sie zu Minihüllkurven werden. Ein dritter LFO, der über die Wellenform Sinus verfügt, kann im Zusammenspiel mit dem Modulationsrad eines Keyboards zur dynamischen Steuerung von VCOs, VCF und VCA genutzt werden.

Die Zuweisung der Modulatoren erfolgt über Selektoren, die neben den jeweiligen Zielen zu finden sind. Somit lassen sich die internen Modulationsverbindungen extrem schnell umstellen – ideal für den Live-Einsatz.
Für die Einbindung externer Modulations-, Steuer- und Audioquellen gibt es neun Eingänge, worüber sich Oszillatoren, Filter, VCA, CV/Gate und Mixer des DOMINION X mit anderen Analogsynthesizern wie z.B. dem MEGAZWERG, Analogsequenzern wie z.B. dem URZWERG PRO oder Modularsystemen verbinden lassen.
Ein Extra-Selektor erlaubt die Zuweisung von Velocity auf bis zu 11 verschiedene Modulationsziele.

DOMINION X verfügt über 128 Speicherplätze für eigene Soundkreationen. Zur Unterstützung beim Klangprogrammieren ohne angeschlossenes Keyboard gibt es verschiedene Demosequenzen. Für die Nutzung des DOMINION X als Filterbox über den Audioeingang lässt sich der VCA permanent öffnen. Über die hintere Insert-Buchse kann ein Effektgerät oder Verzerrerpedal in den Signalweg eingeschleift werden."

2 comments:

  1. Here is a demo made ​​entirely on the Dominion X http://youtu.be/K3vHr9WMRKo

    ReplyDelete

To reduce spam, comments for posts older than one week are not displayed until approved, usually same day. Do not insult people. For items for sale, do not ask if it is still available. Check the auction link and search for the item. Auctions are from various sellers and expire over time. Posts remain for the pics and historical purposes. This site is meant to be a daily snapshot of some of what was out there in the world of synths.

PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH