NAMM: AtomoSynth Comes to Eurorack

via AtomoSynth
We now know what these teaser pics were for: one, two. 

"Hello world... yes... AtomoSynth goes modular, these are our first eurorack modules: KOE and KONEKO.... soon more details!!"

Details on the KONEKO MIDI to CV (KOE will follow):

"Hello world it is the KONEKO eurorack module, it is an affordable Midi to CV converter (Volt per Octave), it is 14HP width and needs +/- 12V, +5V power.

Main features:
CV1 PITCH output 0 to +5 Volt range (5 octaves) it comes from a very accurate 12 bit resolution (4096 steps) digital to analog converter DAC, which translates the incoming midi note messages to voltage. It also responds to the pitch bend or pitch wheel control, according to the midi standard it has a range of +/- two half steps.

Glide effect, it affects the CV1 PITCH output.

Gate output 0 or +5 Volt. it has a red LED that indicates when there is an active gate signal.

CV2 output 0 to +5 Volt range, it comes from a 7 bit resolution (128 steps) digital to analog converter, it can be easily set to output the velocity or any controller CC from the midi device.

PROGRAM button allows you easily set the midi channel just by pushing it and then pushing a note in your midi keyboard, the midi channel will be automatically set and stored even when the unit is turn off. It also allows you to set the controller CC for the CV2 output, just push the Program button and move any controller in your midi device and it will be set automatically.

Midi In and Midi Thru connectors, allows you to connect many midi devices in chain.

available soon... "

Great way to add some color to your system. These glow nicely in black light.

Update: Pics and details on the KOE

"This is the KOE module, it is japanese for "voice" because it is a complete synth voice in just one affordable module, it is 28 HP width and needs +/- 12V power.

Main features:

One VCO with square and ramp wavefoms with depth and tune controls, tune control is a ten turn potentiometer which allows you easily set octave, tune and fine tune with
just one knob.

Noise sourse, it can be set to affect the VCO frequency or it can be mixed with the VCO and audio input.

One LFO with square and triangle waveforms is can be set to affect the VCO frequency or the Filter cut off, it also features an output jack.

High pass and Low pass vactrol based filter with cutoff and resonance/peak control, it also features an input jack to control the cut off frequency.

Two Envelope generators: EG1 with decay control which is set to affect the cut off frequency of the filter and EG2 with attack and release controls, set to affect the volume, it has an output jack and input jack for the incoming gate signal.

Also it features an audio input, it allows process any axternal audio signal with the filter and envelopes."